How To Cut And Solder Copper Pipe

Steps: 1. Cut copper pipe using a tubing cutter. 2. Smooth the inside of the just-cut pipe end with a reaming tool. 3. Buff clean the outside of the pipe end with a strip of emery cloth. 4. Clean the inside of the pipe with pipe brush or rolled-up cylinder of emery cloth. 5. Brush flux around the outside of the pipe, and around the inside of the fitting. 6. Push the fitting onto the pipe end. Then use a propane torch to heat one side of fitting. 7. When the flux starts to bubble, apply solder to the joint. 8. Once the solder is drawn around the entire joint, remove the flame. 9. Wipe away excess solder from the joint with a thick cloth.

Shopping

Thick cotton cloth

Tools